Maximum equivalent-time sampling rate - 20MSa/s

Maximum real-time sampling rate - 2MSa/s

Resolution - 8 bits

Sample memory depth - 256 bytes

Analog bandwidth - 1MHz

Vertical sensitivity - 100mV/Div - 5V/Div

Vertical position adjustable with indicator

Input impedance - 1MΩ

Max input voltage - 50Vpp (1:1 probe) [500Vpp for 10:1 probe]

DC/AC coupling

Horizontal - 0.5μs/Div - 10m(minute)/Div

Auto, normal and single trig modes

Rising/falling edge trigger

External trig available

Trig output is available, which makes it possible to cascade scopes to do multi-channel capture.

Trig level adjustable with indicator

Hold/run feature

Save up to 6 captures to EEPROM and retain after power down

FFT capable - size of 256 points and 512 points selectable, sampling rate of 1Ksps to 2Msps selectable

Retrieve and display saved captures

Transfer screen to PC as bitmap file via serial connection

Built-in 500Hz/5Vpp test signal

Frequency counter (only for TTL level input signal)

9 DC power supply

Dimension: 110mm X 65mm X 25mm (without case)

062 Detailed assembly notes for 06202KP [ Thank Mr. Razvan who created this wonderful article! It is clear, accurate, and detailed. Strongly recommended for beginners. This article can also be downloaded from Mr. Razvan blog - http://simlife.blogspot.com/2010/06/diy-oscilloscope.html. ]

JYEShot [ This is a nice tool created by Michael Kirk for receiving, saving, and displaying waveforms captured by 062 DSO. It is cool and very handy! More than that it can enlarge received images and can log data sent from 062 DSO by XModem protocol. It is strongly recommended for users who do screen capture frequently. ]