Related photos: FFT photos: Video: FFT_FreqSweepingSignal.mp4 (14.6M) |
PN: 06203P
Descriptions:
This is the fully assembled and tested version. Simple clip probe and AC/DC power adapter (input voltage range 100 - 240V with North American style plug
or European style plug) are included.
Weight: 200g (including P.S. adapter)
Dimension: 110mm X 65mm X 25mm
PN: 06204KP
Descriptions:
This is the KIT version. All SMD components are pre-soldered and MCU programmed. Users only need to solder the through-hole parts.
Please note that AC/DC power adapter is not included with the kit.
[Contents] [Package]
Weight: 130g
Dimension: 110mm X 65mm X 25mm
Related items:
Important Documents:
Assembly Notes [ 5.6M Bytes, updated 2010.07.09 ]
Troubleshooting Guide [ Updated 2010.08.01 ]
[ Note 1: All kits shipped with the Quick Reference
and Schematic only. All other documents need to be downloaded from this site.]
[ Note 2: The improved models are not shipped with bootloader flashed because we believe it increases the chance of corrupting codes.
Users who want it can flash it themselves. The bootloader is available here.]
Maximum equivalent-time sampling rate - 20MSa/s
Maximum real-time sampling rate - 2MSa/s
Resolution - 8 bits
Sample memory depth - 256 bytes
Analog bandwidth - 1MHz
Vertical sensitivity - 100mV/Div - 5V/Div [New! Indicator added]
Vertical position adjustable with indicator
Input impedance - 1MΩ
Max input voltage - 50Vpp (1:1 probe) [500Vpp for 10:1 probe]
DC/AC coupling
Couple indicator [New]
Horizontal - 0.5μs/Div - 10m(minute)/Div
Auto, normal and single trig modes
Rising/falling edge trigger
External trig available
Trig output is available, which makes it possible to cascade scopes to do multi-channel capture.
Trig level adjustable with indicator
Hold/run feature
Save up to 6 captures to EEPROM and retain after power down
Retrieve and display saved captures
FFT function available - size of 256 points and 512 points selectable, sampling rate of 1Ksps to 2Msps selectable
Transfer screen to PC as bitmap file via serial connection
Built-in 500Hz/5Vpp test signal
Frequency Meter (only for TTL level input signal)
Auto switching between Oscilloscope Mode and Frequency Meter Mode [New]
LCD contrast adjustabe [New]
Footprints provided for analog extend/experiments - users can quickly build their own analog circuits (amplifiers, filters, oscillators, etc) using two redundant on-board
opamps [New]
Precise voltage reference provided for accurate analog measurement [New]
9 DC power supply
Dimension: 110mm X 65mm X 25mm (without case)
Operating Instructions [ 1.9M Bytes, updated 2010.12.15 ]
Assembly Notes [ 2.1M Bytes, updated 2010.07.09 ]
Troubleshooting Guide [ 3.3M Bytes, updated 2010.08.01 ]
|