062 Digital Storage Oscilloscope DIY Kit
暂无图片 Related photos:
Assemblied board - front
Assemblied board - rear
500Hz test signal
Scope in use

Example of screen file
Weight: 130g

Weight: 130g


Related items:

Kit includes:
1 ) All parts (excluding power adapter)
2 ) Schematic
3 ) Assembly Notes (need to download from this site)
4 ) Operatiing instructions (neet to download from this site)
5 ) Quick Reference sheet
6 ) MCU (ATmega64) has been pre-soldered and programmed
[ Note 1: SMD soldering skills are required for 06201KP. Fortunately there are plenty of sites that teach these skills. Simply search with "SMD soldering" you will find lots of them. ]
[ Note 2: Started from Dec 1, 2009 all kits shipped with the Quick Reference and Schematic only. All other documents can be downloaded from this site (below) or alternatively http://groups.google.com/group/jye-tech-oscilloscopes/files . ]

Features:
  • Max sample rate - 5M/s (AUTO mode),8 bits
  • Sample memory depth - 256 bytes
  • Analog bandwidth - 1MHz
  • Vertical sensitivity - 100mV/Div - 5V/Div
  • Vertical position adjustable with indicator
  • Input impedance - 1MΩ
  • Max input voltage - 50Vpp
  • DC/AC coupling
  • Horizontal - 2μs/Div - 10m(minute)/Div
  • Auto, normal and single trig modes
  • Rising/falling edge trigger
  • External trig available
  • Trig level adjustable with indicator
  • Hold/run feature
  • Save up to 6 captures to EEPROM and retain after power down
  • Retrieve and display saved captures
  • Transfer its screen to PC as bitmap file via serial connection
  • Built-in 500Hz/5Vpp test signal
  • Frequency counter (only for TTL level input signal)
  • 9 DC power supply
  • Dimension: 110mm X 65mm X 25mm (without case)

  • Bonus feature:
    The kit can be used as a very good AVR experiment/prototype board. Users can customize it for particular application or use it to do further development.
  • Dot matrix LCD display, key pad, ADC, and analog front end included
  • Unused pins brought to side of board for easy connection/extention
  • Can be programmed via bootloader as well as most popular AVR programmers (some signal switch-over may be needed)
  • Best of all, a programming template package that includes source codes, LCD driver, and related datasheets is provided.

  • Please note: The oscilloscope kit serves educational and training purpose. However, due to its complexity it does require DIYers having considerable electrical knowlegds and skills to successfully complete it. Buyers are strongly recommended to carefully read all related documents before placing an order and make sure having adequate ability to finish kits. We have provided effective technical assistance through email and dedicated forum so far and will continue to do so to our best in future. We make every effort to ensure proper parts are shipped and offer free replacements in case shipped parts are proved defective. Thousands of the kits have been sold and only scarce of failure cases reported. Nevertheless we can not guarantee every DIYer ended up with a working unit. So if a usable oscilloscope is your first priority we suggest you to purchase the fully assembled and tested version (PN: 06201P).


    Resources:
    Operating Instructions [ pdf ] [ word ] ( 2010.02.11 ) *
    Assembly Notes [ pdf ] [ word ] ( 2010.02.24 ) *

    * Thank Mr. B Burns from USA! He has spent his valuable time to correct language errors and refine many phrases for this document.