Related photos: FFT photos: Video: FFT_FreqSweepingSignal.mp4 (14.6M) Example of screen file |
Note: This model was discontinued. Please purchase PN: 06204KP
PN: 06202KP (
All SMD components pre-soldered )
Weight: 130g
Dimension: 110mm X 65mm X 25mm
PN: 06201KP (
Only the majar IC pre-soldered ) [Discontiued]
Weight: 130g
Dimension: 110mm X 65mm X 25mm
[
Finished outlook
]
Related items:
Kit includes:
1 ) All parts (excluding power adapter)
2 ) Schematic
3 ) Assembly Notes (need to download from this site)
4 ) Operatiing instructions (neet to download from this site)
5 ) Quick Reference sheet
6 ) MCU (ATmega64) has been pre-soldered and programmed
[ Note 1: SMD soldering skills are required for 06201KP. Component size can be as small as 0603 (0.06" X 0.03"). Fortunately there
are plenty of sites that teach these skills. Simply search with "SMD soldering" you will find lots of them. But still we do not recommend beginners who do not have SMD
soldering experiences to try this kit. ]
[ Note 2: Started from Dec 1, 2009 all kits shipped with the Quick Reference
and Schematic only. All other documents can be downloaded from this site (below) or alternatively
http://groups.google.com/group/jye-tech-oscilloscopes/files
. ]
Maximum equivalent-time sampling rate - 20MSa/s
Maximum real-time sampling rate - 2MSa/s
Resolution - 8 bits
Sample memory depth - 256 bytes
Analog bandwidth - 1MHz
Vertical sensitivity - 100mV/Div - 5V/Div
Vertical position adjustable with indicator
Input impedance - 1MΩ
Max input voltage - 50Vpp (1:1 probe) [500Vpp for 10:1 probe]
DC/AC coupling
Horizontal - 0.5μs/Div - 10m(minute)/Div
Auto, normal and single trig modes
Rising/falling edge trigger
External trig available
Trig output is available, which makes it possible to cascade scopes to do multi-channel capture.
Trig level adjustable with indicator
Hold/run feature
Save up to 6 captures to EEPROM and retain after power down
FFT capable - size of 256 points and 512 points selectable, sampling rate of 1Ksps to 2Msps selectable
Retrieve and display saved captures
Transfer screen to PC as bitmap file via serial connection
Built-in 500Hz/5Vpp test signal
Frequency counter (only for TTL level input signal)
9 DC power supply
Dimension: 110mm X 65mm X 25mm (without case)
Bonus feature:
The kit can be used as a very good AVR experiment/prototype board. Users can customize it for
particular application or use it to do further development.
Dot matrix LCD display, key pad, ADC, and analog front end included
Unused pins brought to side of board for easy connection/extention
Can be programmed via bootloader as well as most popular AVR programmers
(some signal switch-over may be needed)
Best of all, a programming template package
that includes source codes, LCD driver, and related datasheets is provided.
062 Detailed assembly notes for 06202KP [ Thank Mr. Razvan who
created this wonderful article! It is clear, accurate, and detailed. Strongly recommended for beginners. This article can also be downloaded from Mr. Razvan blog
- http://simlife.blogspot.com/2010/06/diy-oscilloscope.html. ]
JYEShot [ This is a nice tool created by Michael Kirk for receiving, saving, and displaying
waveforms captured by 062 DSO. It is cool and very handy! More than that it can enlarge received images and can log data sent from 062 DSO by XModem protocol. It is strongly recommended
for users who do screen capture frequently. ]
* Thank Mr. B Burns from USA! He has spent his valuable time to correct language errors
and refine many phrases for this document.
|